[BMWCSRegistry] Wheels, wheels, wheels

[David Dart]

Just to clarify for me.  The 30mm offset you are referring to - Are you
talking about 30mm wheel spacers?  

What spacers are required to accommodate normal wheels from a latter chassis
such as E12 and E28 chassis?

Cheers

David.


-----Original Message-----
From: bmwcsregistry-bounces at idb.ded.forest.net
[mailto:bmwcsregistry-bounces at idb.ded.forest.net] On Behalf Of Peter
Midwestbike
Sent: Tuesday, April 08, 2008 9:57 AM
To: bmwcsregistry at idb.ded.forest.net
Subject: Re: [BMWCSRegistry] Wheels, wheels, wheels

I'm pretty sure they are 30mm offset.  Yes, it is very tight in the front.
The rims are from the late 80's, manufactured by BBS and are 3 piece.  I got
them from an e30 M3 that I purchased and I swapped some beat up original
rims for these light weight beauties.  The only thing I don't like about
them is the gold color.  I'll eventually get them refinished to either black
with a polished rim or the color of the car with a polished rim.  But
that'll come after the restoration and the saving up of a lot of cash.

Peter

 Peter Louton

www.midwestbicycleworks.com
260-744-0505 or 260-615-3661
-----Original Message-----
From: simsanthony at comcast.net
Date: Monday, Apr 7, 2008 7:46 pm
Subject: Re: [BMWCSRegistry] Wheels, wheels, wheels
To: bmwcsregistry at idb.ded.forest.net (CoupeGruppe)

30mm is plenty of clearance for the top of your head -- an inch is as good
as a mile, right?  But, an 8" wheel with a 30mm offset is not likely to fit
the front of an e9, the struts are too close.  You could probably get away
with a 20mm offset.

Tony

 -------------- Original message ----------------------
From: "Peter Midwestbike" <peter.midwest at midwestbicycleworks.com>
 I've been running 16x8 with 225/35 and I haven't rolled my fender lips.  I
think  my offset is 30mm off the top of my head.  The only issue I have had
is under  hard cornering, the inner part of the tire might rub just a
fraction against the  strut.  Not enough for me to get worried about.  
 
 Peter
  Peter Louton
 
 www.midwestbicycleworks.com
 260-744-0505 or 260-615-3661
 -----Original Message-----
 From: "Buettner, David L" <buettner at fvtc.edu>
 Date: Monday, Apr 7, 2008 1:32 pm
 Subject: [BMWCSRegistry] Wheels, wheels, wheels
 To: "bmwcsregistry at idb.ded.forest.net" <bmwcsregistry at idb.ded.forest.net>
 
 Steve:
 
 I have lots of wheels.  I'll have to verify diameter when I get back in
town  late this week, but there are three styles.  One set is newly blasted
and  painted Alpina look-a-likes.  Another is the bottle-cap wheel, original
condition and pretty nice (currently with very nice Michelin Pilot Sports)
and  the third set (actually two sets, I think) are the BMW mag wheel style.
They  are original and decent, although I doubt there are four perfect ones.
None are  seriously damaged, just typical used wheels.
 
 Let me know if any of these interests you and I'll check to see if any are
15" 
 diameters.  I know none are 16s.
 
 Dave
 _______________________________________________
 Please edit the length of replies
 BMWCSRegistry mailing list
 BMWCSRegistry at idb.ded.forest.net
 http://idb.ded.forest.net/mailman/listinfo/bmwcsregistry
 
 
 _______________________________________________
 Please edit the length of replies
 BMWCSRegistry mailing list
 BMWCSRegistry at idb.ded.forest.net
 http://idb.ded.forest.net/mailman/listinfo/bmwcsregistry

_______________________________________________
Please edit the length of replies
BMWCSRegistry mailing list
BMWCSRegistry at idb.ded.forest.net
http://idb.ded.forest.net/mailman/listinfo/bmwcsregistry


_______________________________________________
Please edit the length of replies
BMWCSRegistry mailing list
BMWCSRegistry at idb.ded.forest.net
http://idb.ded.forest.net/mailman/listinfo/bmwcsregistry



__________ NOD32 2257 (20070511) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com